WRAP IT UP!

TOM GOMEZ . May 12, 2023 . All Feature Vehicles

Save ArticleLogin to save it

One of the best ways to customize your late model vehicle is to change the factory interior and exterior surfaces using a vinyl wrap. Changing the stock trim to an updated style personalizes the look of any vehicle.

To demonstrate the ease with which you can achieve this style upgrade we took a 2010 Toyota Tundra Platinum Edition and changed the factory simulated wood trim on the dash and door panels.

There are many articles and videos on how to vinyl wrap a vehicle to change the vehicle’s exterior. We wanted to show you how quick changes to common interior finishes add a dramatic style change and make your ride less factory… and more you.

Check out the wide assortment of colors available for automotive wraps.
Pretty much any color you can think of and new ones are coming out every year.

Out with factory fake plastic wood finish, in with an updated style.

Miguel carefully removes the plastic switches from the armrest and inspects for any loose or broken wires.

We contacted Miguel at 805 Wraps located in Ventura, California and showed him our Tundra’s outdated faux wood accents. He took one look and said “No problem, what do you want to change it to?” He pulled out a huge key ring of sample styles to choose from. Wow, with so many choices we are going to have a hard time picking just one!

Back in the ‘80s when wrapping surfaces with vinyl began to be an option, it was limited to basic primary colors but today the choices are almost endless. With finish options that range from gloss to a flat matte style, all the way up to a color-changing chameleon wrap – in case you didn’t want to settle for just one color.

With so many choices it was difficult to choose but when Miguel showed us a carbon fiber-style wrap we thought it would look perfect on all the door panels of the Tundra. Sweet! Let’s do it!

Miguel uses a 50/50 mix of water and isopropyl alcohol to clean and prep the plastic armrest which ensures good adhesion.

Miguel leaves extra material to be sure there’s plenty to cover.

This new carbon fiber look is going to be killer.

Miguel stretches and smooths out the vinyl. You can now see what it’s going to look like.

Within minutes Miguel had the armrests removed and he was prepping each of them by wiping down the surfaces with a 50% Isopropyl alcohol/water mix to remove any dirt or oil so the vinyl wrap adheres to the faux wood finish armrests.

Once the surfaces were clean it was time to fit the carbon fiber wrap. The first thing was to stretch the fabric over the armrest and basically start molding it around all the curves and the areas where the switches would go. With a little help from a heat gun the fabric bonded tight to the armrest. This is where experience and technique come into play. Knowing how much to stretch the wrap and how much heat is applied to the certain areas that you are working on so there isn’t too much distortion to the vinyl and you achieve good adhesion. Miguel made it look easy.

Once the armrest was wrapped, Miguel used an X-acto knife to carefully trim all the excess material and cut out the areas where the window and door lock switches would be. A quick once-over with a heat gun and the former boring, fake wood trim armrest was now a bitchin’ looking carbon fiber finish piece.

The heat gun takes skill to use properly. Too much heat and you warp and burn the material.

Miguel tells us he likes to use a plastic tool to press in the areas he plans on trimming out later. It makes for a smoother fit and finish.

Miguel skillfully trims off the excess material and makes sure the edges are bonded.

Miguel repeated the process on the rest of the doors and within an hour our fake wood-trimmed armrests were a thing of the past. We didn’t have Miguel do the same treatment to the dash because of our limited time and budget but just changing the armrests made a huge difference in the way the interior looked.

Miguel’s keen eye spotted our worn and scratched side window pillars which came from the factory in black. Miguel recommended applying a new swatch of black vinyl so it covered the old, scratched pillars. He said he could have it done in about 30-minutes. True to his word, he transformed the old faded black window side pillars into ones that looked brand new! Good job, Miguel!

What a difference a change of color and texture has on the Tundra’s interior.

Now it’s time to fix those old worn out door pillar panels.

The material is cut and positioned on the truck.

Once everything was done and looking spiffy, we asked Miguel if there is a special way to take care of your vinyl wrap and he said there was. Avery Dennison is one top-brand that manufactures an assortment of products made specifically for the care of vinyl wraps. Miguel advised us if you do normal care of your vehicle and use these products as directed on the bottle. With proper care, your wrap will last 3-4 years before needing a makeover.

The interior and exterior vinyl wrap treatments made this OG Tundra look better than new. Our Tundra looked very stylish with its new carbon fiber armrests and window pillars. We said goodbye and thank you to Miguel.

As we sped off we played “Wrap it Up” by the Fabulous Thunderbirds. Seemed appropriate.

If you’re in the Ventura / Oxnard, California area give Miguel a call and see what he can wrap for you.