JASON MULLIGAN May 23, 2022 All Feature Vehicles
In 1995, Auto Meter revolutionized drag racing with the introduction of the Ultimate Playback tachometer.
In 2001, Auto Meter introduced Generation 3 Ultimate II tachometers, adding innovative Tach Facts Software and the ability to record and compare engine and driveshaft rpm on either the tach itself or a PC.
Today, Auto Meter will launch the next generation of the Ultimate tachometer line, the Ultimate III and the Ultimate DL, which place the power of more advanced data acquisition systems in an affordable, convenient and compact package.
Ultimate III feature highlights include:
More advanced users should consider the Ultimate DL (DataLogger) which adds to your information arsenal by providing connections for and ability to record wideband air/fuel ratio and pressure channel data to the Ultimate III features. Put simply, Ultimate III and Ultimate DL tachometers from Auto Meter provide all of the essential tools needed to dial in your setup minus the complication or expense.
Doug’s Headers announces the D336 long tube race header. Engineered to fit 265-400 small-block Chevrolet engines in a variety of General Motors cars while offering excellent fit and maximum ground clearance. These headers are built with 3/8-inch thick flanges at the cylinder head and three-bolt outlet flanges. The long tube tuner under-chassis exit is made from 16-gauge tubing for durability with 1 ¾-inch primaries and 3-inch collectors for increased horsepower and torque throughout the powerband. Designed to work with automatic and manual transmission cars equipped with power brakes, power steering and air conditioning.
They come standard with a polished high luster heat- and corrosion-resistant metallic ceramic coating for a rich appearance and long life. These headers come complete with reducers, 1,100°F-rated gaskets and premium installation hardware and instructions; they’re also available uncoated.
Doug’s Headers | 909.599.5955 | Dougsheaders.com
ARP has recently expanded its head stud lineup to include a number of aftermarket applications. These include kits for the new Dart LS Next block (with 15- or 23-bolt cylinder heads), big-block Chevy with Brodix SR20 heads and RHS small-block Chevy LS with RHS LS7 heads. New stud kits for OEM applications have also been released.
Many of the new kits for aftermarket engines are manufactured using ARP2000 material, a proprietary alloy that’s heat treated in-house to 220,000 psi. The studs are centerless ground and thread rolled after heat-treating, which adds substantially to their fatigue strength. They provide the extra clamping force required to maintain an optimum cylinder head seal in high combustion pressure environments.
ARP | 800.826.3045 | Arp-bolts.com
Perma-Cool introduces its latest application to its Cool Pack Radiator fan module to fit the 1979-93 Fox-Body Mustangs. These units offer better cooling, increased horsepower and torque over the factory mechanical fan. The aluminum assembly mounts dual high-output 12-inch electric fans putting out over 6,000 cfm, all finished in a durable black powder coat and controlled by an adjustable temperature probe.
Perma-Cool | 951.352.2665 | Perma-cool.com
Hot Rods by Boyd is proud to announce its latest design to add to its Pro Touring lineup. The new HR-99 was created for the performance-minded enthusiast with an emphasis on styling that complements a wide range of vehicles. The HR-99 is available for most five-lug applications in 17- through 22-inch diameters in a range of widths from 7 to 15 inches. Just like the rest of the HRBB pro-touring lineup everything is 100% made in America and 100% made to order. The HR-99 will fit most popular aftermarket brake packages. Hot Rods by Boyd specializes in custom finishes and has a variety of colors that will suit any vehicle’s paint scheme.
Hot Rods by Boyd | 866.612.2693 | hotrodsbyboyd.com
Flaming River’s alternators feature new technologies and increased efficiencies over OEM. Precision-balanced, low mass rotors allow these alternators to operate safely at shaft speeds of 20,000-plus rpm. This high rpm capability, plus excellent output at speeds as low as 400 rpm, gives the user a broader operating rpm range and more flexibility in the size of the crankshaft pulley used. The alternators use twin rectifier plates with twice as many diodes as an OEM alternator, which results in 300% more surface area to dissipate heat. Lower temperatures in the engine compartment keep internal components cooler so they last longer than other alternators on the market.
Flaming River | 800.648.8022 | Flamingriver.com
McLeod Racing announces its new SFI-approved bell housing for the Chevrolet LSX block. The McLeod 8770 bell housing bolts directly to the LSX block with no modifications and allows for the mating of a six-speed transmission.
The 8770 SFI bell housing features a single right-side starter accommodation allowing for easier fitment than dual-pocketed bell housings. This design allows for clearance of factory-style headers and some long tube headers. “The LSX has become the new Chevrolet small-block,” says Paul Lee, NHRA Funny Car driver and McLeod Racing owner, “we listened to our customers who wanted a direct bolt-in SFI bell housing and we are happy to be able to bring it to our customers.”
McLeod Racing | Mcleodracing.com
One year after revealing its remarkable cast-iron LS Next engine block, Dart Machinery reduces the block’s mass and announces an aluminum counterpart. Laden with innovations, the list of performance upgrades incorporated in the Next block is long.
Extended cylinder bores allow a 6.125-inch con rod and a 4-inch stroke to operate while the piston remains squarely in its bore. They will also be comforted by the introduction of Dart’s proven priority mains oiling system, which ensures lubrication reaches the crank and rods first.
Standard LS components are compatible with the Next block. Featuring a standard deck and head bolt pattern, the LS cam and stock oil pump and all other components are accommodated. Steel main caps are featured with 7/16-inch bolts properly splayed to take anchor in the safety of the block’s more reinforced areas.
Other key innovations are Dart’s finest nodular-iron cylinder sleeves, and to facilitate a full kick-out oil pan the block is equipped with dual starter mounts, allowing the starter to be mounted on either side. Dart’s aluminum Next engine block is available in deck heights of 9.240-9.500 inches.
Dart Machinery | Dartheads.com
Goodguys 27th Speedway Motors Southwest Nationals
WestWorld of Scottsdale 16601 North Pima Road, Scottsdale, AZ 85260
2024 Coastal Virginia Auto Show
Virginia Beach, Virginia
Autowash presents Showroom & Shine
Denver, Colorado
11th Annual 2024 Hot Rod Holiday
Springfield, Missouri
Belle River, Louisiana
Please wait...